|
|
|
ART OF STAINED GLASS Solder Joints Goo Practice Your lead came may not touch each other at the joints. This is easily overcome with the joints are at 90° angles, however, when the angles are sharper, a bit more skill is required. You may need to solder in two, or even three passes. Allow the solder to cool between each application.  STEP 2  STEP 3  The distance that the solder extends at the joints should be uniform, both for aesthetic and structural reasons. BAD SOLDER JOINT  GOOD SOLDER JOINT  After puttying, and cleaning, this is what your project may look like:  |